Product Video
Home » Products » High efficiency motor » M2E-H Series High-efficiency Three-phase Marine Induction Motor

M2E-H Series High-efficiency Three-phase Marine Induction Motor

  • Introduction
  • Type Designation
  • Operating Conditions
  • Main Technical Data
  • Ordering Information
Inquiry Form

The M2E-H series of high efficiency three-phase induction motors are completely enclosed fan-cooled marine motors of the squirrel-cage type. This series features low noise, high insulation, and multiple safety systems. These efficient induction motors drive various machines on ships such as pumps, blowers, separators, hydraulic engines and other auxiliary equipment.The motors comply with National Standard IEC60034-1 for the rating and performance of rotating electrical machines and for GB18613-2012 for energy-efficient sea-going vessels. This motor is also approved by CCS and meet the following standards:
IEC60034   Rotating electrical machines
IEC60068   Basic environmental testing procedures
IEC60072   Dimensions and power ratings for rotating electrical machines
IEC60092   Electrical installation in ships

The motors also meet international specifications for the following Ships Classification Societies.
DNV   Det Norske Veritas
LR   Lioyd's Register of Shipping
GL   Germanischer Lloyd
NK   Nippon Kaiji Kyokai
BV   Bureau Veritas
ABS   American Bureau of Shipping
KR   Korean Register of Shipping
RINA   Registro Italiano Navale
RS   Russian Maritime Register of Shipping

Construction
1. IP55 protection rating
2. Material: HT200 cast iron frame with cooling ribs
3. Cylindrical shaft extension. B3 and B35 motors with two shaft extensions are available upon request, but the second shaft extension can only transmit a rated output with direct coupling. The shaft is made of high grade steel No 45.
4. Terminal box conforms to IEC publication 34-8. Six terminal studs are provided and a connecting diagram is displayed on the back cover. The electric clearance is no less than 8mm and the creepage distance is no less than 12mm. An extra terminal is provided inside the box for grounding.

Type Designation
Table 1
Frame Size No. of Poles Bearings
Driving end Non-Driving end
B3, B5, B35 V1
80 2, 4 6204-2RS/Z2 6204-2RS/Z2
90 2, 4, 6 6205-2RS/Z2 6205-2RS/Z2
100 2, 4, 6 6206-2RS/Z2 6206-2RS/Z2
112 2, 4, 6, 8 6306-2RS/Z2 6306-2RS/Z2
132 2, 4, 6, 8 6308-2RS/Z2 6308-2RS/Z2
160 2//4, 6, 8 6209/Z2//6309/Z2 6209/Z2
180 2//4, 6, 8 6211/Z2//6311/Z2 6211/Z2
200 2//4, 6, 8 6212/Z2//6312/Z2 6212/Z2
225 2//4, 6, 8 6312/Z2//6313/Z2 6312/Z2
250 2//4, 6, 8 6313/Z2//6314/Z2 6313/Z2
280 2//4, 6, 8 6314/Z2// 6317/Z2 6314/Z2
315 2//4, 6, 8 6317/Z2// N319/Z2 7317AC /7319AC 6317/Z2
355 2//4, 6, 8 6319/Z2// N322/Z2 7319AC /7322AC 6319/Z2

Operating Conditions
Temperature of ambient air: 0℃~45℃
Altitude: 0m
Relative humidity: ≤95%
Dew: exists
Salt mist: exists
Oil mist: exists
Fungus: exists
Shock: exists
Vibration: exists
Inclination and swing: ±22.5°

Voltage and Frequency
Rated Voltage: 380V or 440V
Rated Frequency: 50Hz or 60Hz

Connection
3kW or Less: Y
More than 3kW: △

Duty Type
Continuous: (S1)

Insulation, Temperature Rise
Insulation: F
Temp. rise of winding: 100K
(resistance method)
Permissible working temp. of bearing: 90℃
(thermometer method)

Type of starting
Direct on full-voltage starting for all sizes；reduced voltage starting allowable at no-load or light load.

Driving Method
Pulley,spur or flexible coupling can be used for driving.

Impregnation and Surface Treatment
The motor windings are impregnated and well treated to be waterproof adn resistant to fungus, mold and sea mist, in accordance with specifications for machines in humid environments.

Vibration
The effective values of vibration velocity,measured at the no-load conditions,do not exceed those given in table 2.

Table 2
Frame size 80~132 160 ~ 225 250 ~ 355
Vibration Velocity (mm/s) Free-mount 1.6 2.2 2.8
Rigid-mount 1.3 1.8 2.3
Table 3
Type Power kW Rated Current A Rated Rotation Speed r/min Efficiency % Power Factor Rated Torque N.m Locked-Rotor Torque Rated Torque Tst Tn Locked-Rotor Current Rated current Ist In Maximum Torque Rated Torque Tax Tn Noise dB (A)
380V 50Hz 440V 60Hz 380V 50Hz 440V 60Hz
M2E-80M1-2-H 0.75 1.7 1.5 2870 3480 80.7 0.82 2.5 2.3 7.0 2.3 66
M2E-80M2-2-H 1.1 2.4 2.1 2875 3485 82.7 0.83 3.7 2.2 7.3 2.3 66
M2E-90S-2-H 1.5 3.2 2.8 2880 3490 84.2 0.84 5.0 2.2 7.6 2.3 71
M2E-90L-2-H 2.2 4.6 4.0 2880 3490 85.9 0.85 7.3 2.2 7.6 2.3 71
M2E-100L-2-H 3 6.0 5.2 2880 3490 87.1 0.87 9.9 2.2 7.8 2.3 76
M2E-112M-2-H 4 7.8 6.7 2915 3535 88.1 0.88 13.1 2.2 8.3 2.3 79
M2E-132S1-2-H 5.5 10.6 9.2 2930 3540 89.2 0.88 17.9 2.0 8.3 2.3 81
M2E-132S2-2-H 7.5 14.4 12.4 2930 3540 90.1 0.88 24.4 2.0 7.9 2.3 81
M2E-160M1-2-H 11 20.6 17.8 2945 3550 91.2 0.89 35.7 2.0 8.1 2.3 81
M2E-160M2-2-H 15 27.9 24.1 2945 3550 91.9 0.89 48.6 2.0 8.1 2.3 81
M2E-160L-2-H 18.5 34.2 29.5 2945 3550 92.4 0.89 60.0 2.0 8.2 2.3 81
M2E-180M-2-H 22 40.5 35.0 2950 3555 92.7 0.89 71.2 2.0 8.2 2.3 83
M2E-200L1-2-H 30 54.9 47.4 2965 3575 93.3 0.89 96.6 2.0 7.6 2.3 84
M2E-200L2-2-H 37 67.4 58.2 2965 3575 93.7 0.89 119 2.0 7.6 2.3 84
M2E-225M-2-H 45 80.8 69.8 2965 3575 94.0 0.90 145 2.0 7.7 2.3 86
M2E-250M-2-H 55 98.5 85.1 2975 3585 94.3 0.90 177 2.0 7.7 2.3 89
M2E-280S-2-H 75 134 115.7 2975 3585 94.7 0.90 241 1.8 7.1 2.3 91
M2E-280M-2-H 90 160 138.2 2975 3585 95.0 0.90 289 1.8 7.1 2.3 91
M2E-315S-2-H 110 195 168.4 2985 3585 95.2 0.90 352 1.8 7.1 2.3 92
M2E-315M-2-H 132 234 202.1 2985 3585 95.4 0.90 422 1.8 7.1 2.3 92
M2E-315L1-2-H 160 279 241.0 2985 3585 95.6 0.91 512 1.8 7.2 2.3 93
M2E-315L2-2-H 200 349 301.4 2985 3585 95.8 0.91 640 1.8 7.2 2.3 93
M2E-355M-2-H 250 436 376.5 2985 3585 95.8 0.91 800 1.6 7.2 2.2 102
M2E-355L-2-H 315 549 474.0 2985 3585 95.8 0.91 1008 1.6 7.2 2.2 106
View Full Table
Table 4
Type Power kW Rated Current A Rated rotation speed r/min Eff . % P.F Rated Torque N.m Locked-Rotor Torque Rated Torque Tst Tn Locked-Rotor Current Rated current Ist In Maximum Torque Rated Torque Tax Tn Noise dB (A)
380V 50Hz 440V 60Hz 380V 50Hz 440V 60Hz
M2E-80M1-4-H 0.55 1.4 1.2 1430 1740 80.8 0.75 3.7 - - - -
M2E-80M2-4-H 0.75 1.8 1.6 1430 1740 82.5 0.75 5.0 2.3 6.6 2.3 56
M2E-90S-4-H 1.1 2.6 2.2 1430 1740 84.1 0.76 7.3 2.3 6.8 2.3 59
M2E-90L-4-H 1.5 3.5 3.0 1430 1740 85.3 0.77 10.0 2.3 7.0 2.3 59
M2E-100L1-4-H 2.2 4.8 4.1 1440 1750 86.7 0.81 14.6 2.3 7.6 2.3 64
M2E-100L2-4-H 3 6.3 5.4 1440 1750 87.7 0.82 19.9 2.3 7.6 2.3 64
M2E-112M-4-H 4 8.4 7.3 1455 1755 88.6 0.82 26.3 2.2 7.8 2.3 65
M2E-132S-4-H 5.5 11.2 9.7 1465 1765 89.6 0.83 35.9 2.0 7.9 2.3 71
M2E-132M-4-H 7.5 15.0 13.0 1465 1765 90.4 0.84 48.9 2.0 7.5 2.3 71
M2E-160M-4-H 11 21.5 18.6 1470 1770 91.4 0.85 71.5 2.2 7.7 2.3 73
M2E-160L-4-H 15 28.8 24.9 1470 1770 92.1 0.86 97.4 2.2 7.8 2.3 73
M2E-180M-4-H 18.5 35.3 30.5 1470 1770 92.6 0.86 120 2.0 7.8 2.3 76
M2E-180L-4-H 22 41.8 36.1 1470 1770 93.0 0.86 143 2.0 7.8 2.3 76
M2E-200L-4-H 30 56.6 48.9 1475 1775 93.6 0.86 194 2.0 7.3 2.3 76
M2E-225S-4-H 37 69.6 60.1 1480 1780 93.9 0.86 239 2.0 7.4 2.3 78
M2E-225M-4-H 45 84.4 72.9 1480 1780 94.2 0.86 290 2.0 7.4 2.3 78
M2E-250M-4-H 55 103 89.0 1485 1785 94.6 0.86 354 2.2 7.4 2.3 79
M2E-280S-4-H 75 136 117.5 1490 1795 95.0 0.88 481 2.0 6.9 2.3 80
M2E-280M-4-H 90 163 140.8 1490 1795 95.2 0.88 577 2.0 6.9 2.3 80
M2E-315S-4-H 110 197 170.1 1490 1795 95.4 0.89 705 2.0 7.0 2.2 88
M2E-315M-4-H 132 236 203.8 1490 1795 95.6 0.89 846 2.0 7.0 2.2 88
M2E-315L1-4-H 160 285 246.1 1490 1795 95.8 0.89 1026 2.0 7.1 2.2 88
M2E-315L2-4-H 200 352 304.0 1490 1795 96.0 0.90 1282 2.0 7.1 2.2 88
M2E-355M-4-H 250 440 380.0 1495 1795 96.0 0.90 1597 2.0 7.1 2.2 95
M2E-355L-4-H 315 554 478.5 1495 1795 96.0 0.90 2012 2.0 7.1 2.2 102
View Full Table
Table 5
Type Power kW Rated Current A Rated rotation speed r/min Eff . % P.F Rated Torque N.m Locked-Rotor Torque Rated Torque Tst Tn Locked-Rotor Current Rated current Ist In Maximum Torque Rated Torque Tax Tn Noise dB (A)
380V 50Hz 440V 60Hz 380V 50Hz 440V 60Hz
M2E-80M 1-6-H 0.37 1.2 1.1 910 1130 67.0 0.68 3.9 - - - -
M2E-80M2-6-H 0.55 1.6 1.4 925 1140 74.0 0.70 5.7 - - - -
M2E-90S-6-H 0.75 2.0 1.7 945 1155 78.9 0.71 7.6 2.0 6.0 2.1 57
M2E-90L -6-H 1.1 2.8 2.4 950 1160 81.0 0.73 11.1 2.0 6.0 2.1 57
M2E-100L-6-H 1.5 3.8 3.3 950 1160 82.5 0.73 15.1 2.0 6.5 2.1 61
M2E-112M-6-H 2.2 5.4 4.7 965 1170 84.3 0.74 21.8 2.0 6.6 2.1 65
M2E-132S-6-H 3 7.2 6.2 975 1180 85.6 0.74 29.4 2.0 6.8 2.1 69
M2E-132M1-6-H 4 9.5 8.2 975 1180 86.8 0.74 39.2 2.0 6.8 2.1 69
M2E-132M2-6-H 5.5 12.7 11.0 975 1180 88.0 0.75 53.9 2.0 7.0 2.1 69
M2E-160M-6-H 7.5 16.2 14.0 980 1185 89.1 0.79 73.1 2.0 7.0 2.1 73
M2E-160L-6-H 11 23.1 20.0 980 1185 90.3 0.80 107 2.0 7.2 2.1 73
M2E-180L-6-H 15 30.9 26.7 980 1185 91.2 0.81 146 2.0 7.3 2.1 73
M2E-200L 1-6-H 18.5 37.8 32.6 985 1190 91.7 0.81 179 2.0 7.3 2.1 73
M2E-200L 2-6-H 22 44.8 38.7 985 1190 92.2 0.81 213 2.0 7.4 2.1 73
M2E-225M-6-H 30 59.1 51.0 985 1190 92.9 0.83 291 2.0 6.9 2.0 74
M2E-250M-6-H 37 71.7 61.9 985 1190 93.3 0.84 359 2.0 7.1 201 76
M2E-280S-6-H 45 85.8 74.1 990 1190 93.7 0.85 434 2.0 7.3 201 78
M2E-280M-6-H 55 103 89.0 990 1190 94.1 0.86 531 2.0 7.3 2.0 78
M2E-315S-6-H 75 143 123.5 990 1190 94.6 0.84 723 2.0 6.6 2.0 83
M2E-315M-6-H 90 170 146.8 990 1190 94.9 0.85 868 2.0 6.7 2.0 83
M2E-315L 1-6-H 110 207 178.8 990 1190 95.1 0.85 1061 2.0 6.7 2.0 83
M2E-315L 2-6-H 132 244 210.7 990 1190 95.4 0.86 1273 2.0 6.8 2.0 83
M2E-355M1-6-H 160 296 255.6 995 1190 95.6 0.86 1536 1.8 6.8 2.0 85
M2E-355M2-6-H 200 365 315.2 995 1190 95.8 0.87 1920 1.8 6.8 2.0 85
M2E-355L-6-H 250 456 393.8 995 1190 95.8 0.87 2399 1.8 6.8 2.0 91
View Full Table

Table 6
Conventional mounting types and suitable frame sizes are given in the following table (with"√")

Frame Basic type Derived type
B3 B5 B35 V1 V3 V5 V6 B6 B7 B8 V15 V36 B14 B34 V18
80 ~ 112 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
132 ~ 160 √ √ √ √ √ √ √ √ √ √ √ √ - - -
180 ~ 280 √ √ √ √ - - - - - - - - - - -
315 ~ 355 √ - √ √ - - - - - - - - - - -
View Full Table
"√" means the structure can be manufactured. If not specified, the terminal box will be placed on the right side when facing the driving end.

Dimensions
The B14 motor features a frame without feet and an end-shield with flange (with threaded holes).

Frame size Poles Mounting Dimensions Overall Dimensions
D E F G M N P R S T AC AD HF L
80M 2,4,6 19 40 6 15.5 100 80 120 0 4-M6 3.0 175 145 - 305
90S 24 50 8 20 115 95 140 4-M8 195 165 360
90L 390
100L 28 60 24 130 110 160 3.5 215 180 245 435
112M 240 200 275 435
View Full Table

The B34 motor features a frame with feet and an end-shield with flange (with threaded holes).

Frame size Poles Mounting Dimensions Overall Dimensions
A B C D E F G H K M N P R S T AA BB HA AB AC AD HD L
80M 2,4,6 125 100 50 19 40 6 15.5 80 10 100 80 120 0 4-M6 3 34 142 12 165 175 145 225 305
90S 140 100 56 24 50 8 20 90 115 95 140 4-M8 34 185 12 180 195 165 260 360
90L 125 210 390
100L 160 140 63 28 60 24 100 12 130 110 160 3.5 39 233 14 205 215 180 270 435
112M 190 140 70 28 60 112 45 216 226 240 200 310 435
View Full Table

The B3 motor features a frame with feet and an end-shield without flange.

Frame size poles Mounting Dimensions Overall Dimensions
A B C D E F G H K AA BB HA AB AC AD HD L
80M 2,4,6 125 100 50 19 40 6 15.5 80 10 34 142 12 165 175 145 225 305
90S 140 100 56 24 50 8 20 90 10 36 185 12 180 195 165 260 360
90L 125 56 24 215 390
100L 160 140 63 28 60 100 12 39 233 14 205 215 180 270 435
112M 190 70 33 112 45 230 14 230 240 190 300 470
132S 216 89 38 80 10 132 55 186 18 270 275 210 345 510
132M 178 224 560
160M 254 210 108 42 110 12 37 160 14.5 65 315 20 314 335 265 420 730
160L 254 355 760
180M 279 241 121 48 14 42.5 180 70 359 22 355 375 280 455 740
180L 279 394 780
200L 318 305 133 55 16 49 200 18.5 70 454 25 390 410 335 535 885
225S 4 356 286 149 60 140 18 53 225 75 431 28 435 470 355 575 895
225M 2 311 55 110 16 49 466 28 890
4,6 60 140 18 53 925
250M 2 406 349 168 60 140 18 53 250 24 80 445 30 490 545 370 615 915
4,6 65 58
280S 2 457 368 190 280 85 510 35 550 660 425 710 990
4,6 75 20 67.5
280M 2 419 65 18 58 550 1040
4,6 75 20 67.5
315S 2 508 406 216 65 18 58 315 28 120 570 45 635 645 530 845 1200
4,6 80 170 22 71 1230
315M 2 457 65 140 18 58 680 1350
4,6 80 170 22 71 1380
315L 2 508 65 140 18 58 1350
4,6 80 170 22 71 1380
355M 2 610 560 254 75 140 20 67.5 355 120 750 52 726 715 750 1020 1570
4,6 95 170 25 86 1600
355L 2 630 75 140 20 67.5 1570
4,6 95 170 25 86 1600
View Full Table

The B5 motor features a frame without feet and an end-shield with flange (with through holes).

Frame size Poles Mounting Dimensions Overall Dimensions
D E F G M N P R S T AC AD HF L
80M 2,4,6 19 40 6 15.5 165 130 200 0 4- φ12 3.5 175 145 - 305
90S 24 50 8 20 195 165 360
90L 390
100L 28 60 24 215 180 250 4- φ14.5 4 215 180 230 435
112M 240 200 245 435
132S 38 80 10 33 265 230 300 0 305 235 345 510
132M 560
160M 42 110 12 37 300 250 350 0 4- φ18.5 5 335 265 360 730
160L 760
180M 48 14 42.5 375 280 470 740
180L 780
200L 55 16 49 350 300 400 0 410 335 520 885
225S 4 60 140 18 53 400 350 450 0 8- φ18.5 470 355 580 895
225M 2 55 110 16 49 890
4,6 60 140 18 53 925
250M 2 500 450 550 0 545 415 650 995
4,6 65 58
280S 2 600 425 710 990
4,6 75 20 67.5
280M 2 65 18 58 1040
4,6 75 20 67.5
View Full Table

The B35 motor features a frame with feet and an end-shield with flange (with through holes).

Frame size Poles Mounting Dimensions Overall Dimensions
A B C D E F G H K M N P R S T AA BB HA AB AC AD HD L
80M 2,4,6 125 100 50 19 40 6 16 80 10 165 130 200 0 4- φ12 3.5 34 142 12 165 175 145 225 305
90S 140 56 24 50 8 20 90 36 180 12 180 195 165 260 360
90L 125 215 390
100L 160 140 63 28 60 24 100 12 215 180 250 0 4- φ14.5 4 39 233 14 205 215 180 270 435
112M 190 70 112 45 230 226 240 200 310 435
132S 216 89 38 80 10 33 132 265 230 300 55 226 18 262 305 235 360 510
132M 178 256 560
160M 254 210 108 42 110 12 37 160 15 300 250 350 0 4- φ18.5 5 65 315 20 314 335 265 420 730
160L 254 355 760
180M 279 241 121 48 14 43 180 70 359 22 355 375 280 455 740
180L 279 394 780
200L 318 305 133 55 16 49 200 19 350 300 400 70 454 25 388 410 335 535 885
225S 4 356 286 149 60 140 18 53 225 400 350 450 0 8- φ18.5 75 431 28 435 470 355 575 895
225M 2 311 55 110 16 49 466 890
4,6 60 140 18 53 925
250M 2 406 349 168 140 53 250 24 500 450 550 80 515 30 490 545 415 665 995
4,6 65 58
280S 2 457 368 190 280 85 510 35 550 600 425 710 990
4,6 75 20 68
280M 2 419 65 18 58 550 1040
4,6 75 20 68
315S 2 508 406 216 65 18 58 315 28 600 550 660 8- φ24 6 120 570 45 635 645 530 845 1200
4,6 80 170 22 71 1230
315M 2 457 65 140 18 58 680 1350
4,6 80 170 22 71 1380
315L 2 508 65 140 18 58 1350
4,6 80 170 22 71 1380
355M 2 610 560 254 75 140 20 67.5 355 740 680 800 120 750 52 726 715 750 1020 1570
4,6 95 170 25 86 1600
355L 2 630 75 140 20 67.5 1570
4,6 95 170 25 86 1600
View Full Table

The V1 motor is vertically mounted and features a frame without feet, an end-shield with flange, and a shaft extension downward.

Frame size Poles Mounting Dimensions Overall Dimensions
D E F G M N P R S T AC AD HF L
180M 2,4,6 48 110 14 42.5 300 250 350 4- φ18.5 5 375 280 500 800
180L 850
200L 55 16 49 350 300 400 0 410 335 550 945
225S 4 60 140 18 53 400 350 450 0 8- φ18.5 470 355 610 985
225M 2 55 110 16 49 980
4,6 60 140 18 53 1015
250M 2 500 450 550 0 545 415 685 1100
4,6 65 58
280S 2 600 425 740 1110
4,6 75 20 67.5
280M 2 65 18 58 1160
4,6 75 20 67.5
315S 2 65 18 58 600 550 660 8- φ24 6 645 530 900 1320
4,6 80 170 22 71 1350
315S 2 65 140 18 58 1470
4,6 80 170 22 71 1500
315L 2 65 140 18 58 1470
4,6 80 170 22 71 1500
355M 2 75 140 20 67.5 740 680 800 415 750 1010 1710
4,6 95 170 25 86 1740
355L 2 75 140 20 67.5 1710
4,6 95 170 25 86 1740
View Full Table
Heater can be mounted in the manner shown by table 15.
Table 15
Frame size Voltage of heating band Power of heating band
YE3-80 ~ 90-H 220 V 20 W
YE3-100 ~ 112-H 220 V 30 W
YE3-132 ~ 160-H 220 V 40 W
YE3-180 ~ 200-H 220 V 50 W
YE3-225 ~ 280-H 220 V 60 W
YE3-315 ~ 355-H 220 V 80 W

Ordering Information
1. When placing an order, specify the motor’s type, output, number of poles, voltage, frequency, mounting arrangement and any other requirements.
2. Customized features include the double shaft extension, position of the terminal box, and the thermistor protection.

Note: All technical data is for reference only and may change depending on the specifications of your order. Please contact us with any questions.

Inquiry Form